Universal Remote Control (URS) UR3-SR2 - Manual (Page 9)

7
Example : If you wish to have the volume and mute keys
operate your Cable Box, press the [CBL]
button in Step3.
G. G. Assigning the Channel keys to a Assigning the Channel keys to a
Dif Dif fer fer ent Device ent Device
By default, the CH UP, CH Down, Numeric buttons, and
LAST keys operate through your Cable Box. If you would
like those keys to operate those functions on a different
device, follow these steps.
STEP1 Press the [SELECT] button and [CBL] button
simultaneously for three seconds. The device
LED will turn on for 20 seconds. The next step
must be performed while the LED is on.
STEP2 Press the [VOL -] button. The device LED will
blink.
STEP3 Press the [TV] button. The device LED will blink
twice to confirm the programming.
*Note : If you wish to have the channel keys operate your
Cable Box, press the [CBL] button instead of the
[TV] button in Step 3.
H. Low Batter H. Low Batter y W y W ar ar ning ning
When the battery is low (2.3V-2.0V) and needs to be
replaced with fresh batteries, device LED will blink 2 times
in sequence whenever a [DEVICE] button is pressed to
turn on equipment.
I. Memor I. Memor y Lock System. y Lock System.
This remote control is designed to retain programmed
memory for 10 years — even after batteries are removed
from the remote control.