Uniden D1680-9 - Manual (Page 9)

Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that
shows the phone number (and sometimes the caller’s name) of incoming
calls. Contact your telephone provider for more information.
Caller ID list Redial list
The phone saves the information for the last 50
received calls to the CID list. The NEW icon marks any
calls received since the last time you checked the list.
All handsets share the same CID list so only one
handset can access the list at a time.
In standby, handsets show how many calls came in
since the last time you checked the CID list.



Each handset
remembers the
last 5 numbers
you dialed on it.
Only one handset
can access its
redial list at a time.


To… Press...
open the CID list cid .
open the redial list rEdial/PausE .
scroll through the
lists
down to scroll from newest to oldest.
uP to scroll from oldest to newest.
dial the
highlighted
number
Talk/flash or sPEakEr.
(If the number is a toll call but there is no 1 at the
beginning, press * to add 1 before dialing.)
close the lists PhonEbook .
For individual record options, highlight a number and press MEnu/sElEcT :
Delete Entry Erase the number from the list.
Store Into Pb
Add the number to the phonebook. The handset prompts
you to edit the name and number and select a personal ring.
Delete All (CID list only) Erase all numbers from the list.
Using Call Waiting
Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
If you get a Call Waiting call, the phone sounds a tone and displays
any CID information received from the waiting call. Press Talk/flash
to switch between the current call and the waiting call; each time you
switch, there is a short pause before you're connected to the other call.
♦
♦