Uniden D1680-9 - Manual (Page 19)

1
Rechargeable Battery Warning
This equipment contains a recharge-
able Nickel-Metal-Hydride (Ni-MH)
battery.
Nickel is a chemical known to the state
of California to cause cancer.
Do not short-circuit the battery.
The batteries in this equipment may
explode if disposed of in a fire.
Do not charge the batteries in any char-
ger other than the one specified in the
owner's manual. Using another charger
may damage the battery or cause it to
explode.
As part of our commitment to
protecting our
environment and
conserving natural
resources, Uniden
voluntarily
participates in an
RBRC® industry
program to collect
and recycle used Ni-MH batteries
within the United States. Please call 1-
800-8-BATTERY for information on
Ni-MH battery recycling in your area.
(RBRC® is a registered trademark of the
Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
Warning! The cords on this
product and/or accessories
contain lead, a chemical known
to the state of California to
cause birth defects or other
reproductive harm. Wash hands
after handling.
Uniden works to reduce lead
content in our products &
accessories.






Compliance Information
FCC Part 68 Information
This equipment complies with Part
68 of the FCC rules and the require-
ments adopted by the ACTA. On the
bottom of this equipment is a label that
contains, among other information,
a product identifier in the format US:
AAAEQ##TXXXX. If requested, this
number must be provided to the phone
company.
An applicable Universal Service
Order Codes (USOC) certification for
the jacks used in this equipment is
provided (i.e., RJ11C) in the packaging
with each piece of approved terminal
equipment. A plug and jack used to
connect this equipment to the premises
wiring and telephone network must
comply with the applicable FCC Part
68 rules and requirements adopted by
the ACTA. A compliant telephone cord
and modular plug is provided with
this product. It is designed to be con-
nected to a compatible modular jack
that is also compliant. See installation
instructions for details.
The REN is used to determine the
number of devices that may be con-
nected to a phone line. Excessive RENs
on a phone line may result in devices
not ringing in response to an incom-
ing call. In most but not all areas, the
sum of RENs should not exceed five
(5.0). To be certain of the number of
devices that may be connected to a
line, as determined by the total RENs,
contact the telephone provider. The
REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits rep-
resented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone com-
pany will notify you in advance that
temporary discontinuance of service