Uniden ANA 9710 - Manual (Page 35)

Using Your ANA 9710 Memory
Use these buttons to operate the
ANA 9710 Memory
Storing a Number
1. Press mem. You will hear a beep,
and see the message:
2. Enter the number (up to 20 digits)
you want to store.
a. To program a Pause in the dialing
sequence, press pause.
3. Press mem. You will see the
message:
4. Enter the number (01) to (20) for
the memory location to store. You
will hear a confirmation beep and
see the message:
Note: After pressing mem the second time, you have 20 seconds to
enter the memory location. Otherwise, an error tone sounds
and the unit returns to Standby.
29