Uniden ANA 9710 - Manual (Page 18)

Wall Installation
Standard Wall Plate Mounting
This Phone is designed to be mounted on a standard AT&T or GTE
wall plate. To attach the wall mount stand to the Base Unit:
1. Slide the Wall Mount stand
into the notches at the top of
the Base Unit, push the Wall
Mount stand down and snap it
into place.
2. Plug the AC Adapter into the Base Unit as previously
described.
3. Place the AC Adapter cord
inside the molded channel of
the Wall Mount stand.
4. Plug one end of the short telephone cord into the LINE jack on
the Base Unit. Optionally, plug one end of a standard 2500
type desk phone into the
PHONE jack. Then place the
telephone cord(s) inside the molded channel(s) on the bottom
of the Wall Mount stand.
5. Plug the other end of the short telephone cord into the modular
wall jack.
12