Uniden DECT2015+2 - Manual (Page 8)

8
Installing the Phone
Connecting the AC adapter
To the base
To avoid risk of fire and shock, only use the Uniden PS-S0635YL3 AC adapter with the base.
To the charging cradle (for multi-handset packs only)
Use only the Uniden
AAD-600S(M) AC adapter
with the charging cradle.
Connect the AC adapter to the DC IN 6V jack
on the bottom of the base.
Connect the AC
adapter to a
standard 240V
AC wall outlet.
Route the cord through the
molded wiring channel.
Don’t put any power cord where it people might
trip over it or step on it. If a power cord becomes
chafed or worn out, it can create a fire or
electrical hazard.
Connect the AC adapter to the DC IN 6V jack
on the bottom of the base.
Connect the AC
adapter to a
standard 240V
AC wall outlet.
Route the cord through the
molded wiring channel.
Don’t put any power cord where it people might
trip over it or step on it. If a power cord becomes
chafed or worn out, it can create a fire or
electrical hazard.
Connect the AC adapter to the
DC IN 9V jack as shown.
(It may already be connected.) Connect the AC adapter
to a standard 240V AC
wall outlet. Connect the AC adapter to the
DC IN 9V jack as shown.
(It may already be connected.) Connect the AC adapter
to a standard 240V AC
wall outlet.
DECT 2015+1 OM.indb 8 7/7/08 12:30:22 PM