Uniden DECT2015+2 - Manual (Page 38)

38
Finding a Lost Handset
Using Hold, Conference and T
ransfer
39
Using Hold, Conference and Transfer
Placing a Call on Hold
During a call, press CLEAr/iNT’CoM to place the caller on hold. If you leave a caller on hold for more than ten
seconds, the display screen will read, Line On Hold.
To return to the party on hold, press TALK/FLASH or
. The phone will return to the holding party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected and the phone will return to standby.
• While a call is on hold, Call Waiting and CID on Call Waiting do not work.
Conferencing
If you have more than one handset, up to three people can participate in a conference call. A three-way conference
call consists of an outside line and two handsets. You can easily join a call already in progress. The handsets must
be currently connected to the same base (see page 15).
Press TALK/FLASH or to join the call.
To hang up, return the handset to the cradle or press END.
The other party will still be connected to the call.
1.
.
1.
.
Handset #1
Handset #2
Outside call
DECT 2015+1 OM.indb 38 7/7/08 12:31:01 PM