Uniden DECT2015+2 - Manual (Page 24)

4
Basic Setup
Activating the Key Touch Tone
Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn this tone on or off.
Press MENU/SELECT.
Select the Handset Setup menu, and then the Key Touch Tone
submenu.
Move the cursor to select On or Off.
Press MENU/SELECT. You will hear a confirmation tone.
Name Tag
Name Tagging works with the caller display number from Caller ID. You will need to subscribe to the Caller ID feature
with your phone company for Name Tagging to work.
When the phone rings, the received caller display number is compared to numbers stored in the phonebook. If
there is a match then any name stored with the phonebook number will be displayed. To change the Name Tagging
setting, follow the steps listed below.
Press MENU/SELECT.
Select the HANDSET SETUP menu, and then the NAME TAG submenu.
Move the cursor to select ON or OFF.
Press MENU/SELECT. You will hear a confirmation tone.
Insert 0
This feature adds “0” or “00” at the beginning of the number received from Caller ID. The default setting for New
Zealand is ON. The default setting for Australia is OFF. To change the Insert 0
setting, follow the steps listed below.
1) Press MENU/SELECT. Select the GLOBAL SETUP menu, and
then the INSERT 0 submenu.
) Move the cursor to select ON or OFF.
3) Press MENU/SELECT. You will hear a confirmation tone.
1.
.
3.
4.
1.
.
3.
4.
DECT 2015+1 OM.indb 24 7/7/08 12:30:45 PM