Uniden DECT1588 - Manual (Page 59)

58 59
Troubleshooting
Installing a telephone line filter or DSL filter
Any.broadband.Internet.service.that.uses.your.telephone
line.might.interfere.with.standard.phones..The.most.common.type.
of.these.services,.DSL,.often.causes.static.on.your.telephone..
Fortunately,.an.easy-to-install.filter.removes.this.static.from.the.line..
Technicians.who.install.DSL.service.usually.leave.several.filters.for.
the.customers;.if.you.can’t.find.them,.call.your.DSL.provider.or.look.
in.any.electronics.store.
Just.plug.the.DSL.filter.into.the.telephone.wall.jack.and.then.plug.
your.phone’s.base.into.the.filter..Make.a.test.call.to.make.sure.the.
noise.is.gone.
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
•.You.lose.a.handset.and.purchase.a.new.one.
•.You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
•.You.are.unable.to.register.any.handsets.to.the.base.
•.When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as.“Handset.#4”.but.you.only.have.two.handsets.)
•.When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.
1).Select.the.base.you.want.to.de-register.the.handset.from.(see.Selecting.the.base.on.page.15).
2).Press.and.hold.END.and.#.for.more.than.five.seconds..Select.Deregister HS.
3).Select.the.handset.which.you.are.operating,.and.then.press.MENU/SELECT.
4).The.phone.will.ask.you.to.confirm.the.deregistration..Select.Yes..The.selected.handset.will.clear.its.registration.
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5).When.the.base.information.is.deleted,.the.handset.displays.Handset not registered-place handset on base to
register. See your Owner’s Manual for help.
Telephone
cord
Telephone
wall jack
DSL filter