Uniden DECT1588 - Manual (Page 35)

34 34 35
Using Caller ID, Call
W
aiting, and Redial Lists
Using Call Waiting
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.
phone,.a.call.waiting.tone.will.sound..If.you.also.have.Caller.ID.service,.the.phone.
shows.the.Caller.ID.information.for.the.incoming.call..Press.TALK/FLASH.on.the.
handset.or.FLASH.on.the.base.to.accept.the.waiting.call..There.is.a.short.pause,.and.
then.you.will.hear.the.new.caller..To.return.to.the.original.caller,.press.TALK/FLASH.
on.the.handset.or.FLASH.on.the.base.
Note:.. You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.
Redialing a Number
You.can.quickly.redial.the.last.five.numbers.dialed.on.each.station.
1).With.the.phone.in.standby,.press.the.rEDIAL/PAUSE.to.open.the.redial.list.
2).Use.
.and. .or.rEDIAL/PAUSE.to.scroll.through.the.redial.list.
3).When.you.find.the.number.you.want.to.dial,.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.
handset.from.the.base.or.press. .on.the.base.
Notes:.•.If.the.number.exceeds.32.digits,.only.the.first.32.digits.are.retained.in.redial.memory.
. •.If.the.redial.memory.is.empty,.Empty.appears.in.the.display.and.you.will.hear.a.beep.
. •.You.can.also.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.
press. .on.the.base.before.you.open.the.redial.list..Find.the.phone.number.you.want.to.dial,.and.then.
press.MENU/SELECT.
Deleting a Redial Record
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:
1).With.the.phone.in.standby,.press.rEDIAL/PAUSE.
2).Use.
.and. .to.scroll.through.the.redial.list.
3).When.you.find.the.redial.number.you.want.to.delete,.press.MENU/SELECT.and.select.Delete Entry.
4).When.the.phone.asks.you.to.confirm,.select.Yes..The.redial.number.is.deleted.