Uniden D1685 - Manual (Page 16)

English - 16
To... Follow these steps from the base or a handset:
Record a
personal
greeting
1. Open the menu with the phone in standby. Select Ans. Setup ,
then select Record Greeting .
2. Press MEnu/sElEcT to start recording. Wait until the system says
"Record greeting" before speaking.
3. Press MEnu/sElEcT to stop recording. The system plays back your
new greeting.
4. To keep the greeting, press PlaY/sToP on the base or press End
on the handset. To re-record it, press MEnu/sElEcT .
Switch
between
greetings
1. Open the menu with the phone in standby. Select Ans. Setup ,
then Greeting Options .
2. The system plays back the current greeting. Press MEnu/sElEcT to
switch greetings.
Delete your
greeting
Switch to your personal greeting; press dElETE on the base or
InTErcoM/clEar on the handset while the greeting is playing.
Accessing the Answering System
With the phone in standby,
you can access the system
from the base or remotely
from any handset:
♦ Only 1 station can access
the system at a time.
♦ During remote access:
– If you do nothing for
30 seconds, the phone
returns to standby.
– The phone beeps so you
know it's waiting for the next command.
– You can press the number key shown next to each command instead of
scrolling through the screens.
Getting Your Messages
To... From the base From a handset
play new
messages
Press PlaY/sToP. Press MEssagE/MuTE .
The system announces the number of new & old messages,
then plays each new message (followed by the day and time if
set) in the order it was received.
restart this
message
Wait 5 seconds after the message begins, then
press PhonEbook. select 1:Repeat .
5:Stop
[ / /select]
Press MESSAGE/MUTE to start
remote operation mode.
Press MENU/SELECT
to choose the
current option
OR
END to exit remote
operation mode.
4:Delete
3:Skip
2:Play 1:Repeat
Use PHONEBOOK to
go back to the
previous option:
Use CID to go to
the next option: