Uniden D1685 - Manual (Page 12)

English - 12
3. When the screen prompts you to confirm, select Yes .
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on the base and all handsets for a specific period of
time (1 to 9 hours) or set the ringers to be off all the time; the answering system
answers any incoming calls without playing anything through the speaker.
1. With the phone in standby, press and hold
sIlEnT on any handset or on the
base. The phone prompts you to select the number of hours ( 1 - 9 or Always
On ) that you want it to stay in silent mode.
2. To confirm, press sIlEnT or just wait about 5 seconds. The phone turns on
the answering system and displays Silent Mode On .
3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold sIlEnT again.
#
If the phone is in silent mode and you turn off the answering system,
the phone exits silent mode.
Multistation Features
#
To use the features in this section, you need at least 1 cordless
handset.
♦ Your base supports a total of 12 cordless accessory handsets, including any
that came with your phone.
♦ You must register accessory handsets to the base before using them.
Handsets that aren’t registered display a “not registered” message. For
registration instructions, see page 20, or the accessory handset manual.
Conference Calling
♦ When an outside call comes in, two cordless handsets and the base can join
in a conference call with the outside caller.
♦ To join a call that’s already in progress, just press Talk/Flash on the handset
or sPEakEr on the base.
♦ To leave the conference call, hang up normally; the other stations remain
connected to the call.