Universal Remote Control (URS) MRF-200 - Manual (Page 4)

P Paagge e 1 1
M MR RF F--2 20 00 0 B B
A AS SE E
S S
T TA AT TIIO ON N
Introduction
The combination of the MX-800 with it’s companion MRF-200 base station
will enable you to place your audio/video components out of sight behind
closed doors and/or in another room of your house. The MX-800 sends radio
signals to the MRF-200 throughout your house (50-100’ away, indoors or out-
doors). The MRF-200 converts your commands to the infrared signals that
control your A/V components.
3. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels
of your components. The Flashers
relay commands to components out
of sight of the MRF-200’s Front
Blaster. The flashers plug in to the
MRF-200’s rear flasher line outputs
via their 10 foot cables.
2.The MRF-200’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-200.
1.The MX-800 remote con-
trol sends radio waves in
every direction, so you don’t
have to point the remote any-
more!