Uniden BC245XLT - Manual (Page 76)

Clone Mode
You can clone the frequency data of one BC 245XLT
scanner to another. After connecting the two scanners,
using the Scanner to Scanner steps (See page 63), make
sure the scanners are turned off. On each scanner, press
and hold
REMOTE
key and turn the radio on. Then release
the key. bc245 will appear on the display.
1. On each scanner,
press .
Or press
or until this
screen is displayed on
both scanners. Then
press . (Clone
Mode)
2. Determine the
scanner that has the
frequency data that
you want to transfer.
This one must be set
up as the “Master
Unit”, and the other
must be set as the
“Slave Unit”.
3. On the scanner that
is the” Master Unit”,
press the key until
FirSt appears in
the display.
4. On the scanner that
is the” Slave Unit”,
press the key until
ClonE appears in
the display.
5. Press the key on
both scanners. The
data transfer is started
from the Master Unit
to the Slave Unit.
72
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:05:24 1999
Color profile: Disabled
Composite Default screen