Uniden BC245XLT - Manual (Page 33)

Search Hold Feature
1. Press at
anytime to stop the
search.
2. Press to
move to the next
higher frequency.
—OR—
Press to
move down to the
previous frequency.
3. Press to resume
searching.
Data Skip
A scanner will normally stop on any transmission it
receives. This means the
BC 245XLT
will stop on data
signals and unmodulated transmissions. You can
automatically skip many of these types of transmissions
during searches.
1. Press to activate
the data skip feature.
The indicator
appears on the
display.
2. Press again to
cancel the data skip
feature.
The indicator
disappears from the
display.
When data skip is active, your scanner may pause
momentarily on an unwanted signal but will resume
searching in 2 or 3 seconds. Data Skip does not function
when the AIR Band is selected.
29
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:02:21 1999
Color profile: Disabled
Composite Default screen