Uniden BC245XLT - Manual (Page 61)

If you are in Trunking Scan mode:
1. Press to return to
conventional mode if
you have been
monitoring a trunking
bank. TRUNK icon
goes out.
2. Press and hold
until you hear two
short beeps.
You’ll hear two short
beeps and BANK and
TRUNK will begin to
flash in the display.
3. Select the trunking
bank you want to
program.
Selecting a Preset Fleet Map
1. Select the Trunking
Programming mode
and the bank you
want to change.
2. Use or
to select E1.
Then press .
3. Press .
4. Use or
to choose the map
you want. For
example, E1P2.
Note: It is required that the trunked frequency has
been programmed before selecting a preset
fleet map.
57
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:04:59 1999
Color profile: Disabled
Composite Default screen