Uniden BC45XLT - Manual (Page 31)

If your BC45XLT is not performing properly, try the following
steps.
Problem Suggestion
Scanner won’t work. • Check the batteries and replace
them if necessary.
Improper reception. • Check the antenna connection or
reposition the antenna.
• Move the scanner.
• You may be in a remote area which
could require an optional multi-band
antenna. Check with your dealer or
local electronics store.
Scan won’t stop. • Check that the squelch is ON.
• Check the antenna connection.
• Check to see if many of the channels
are locked out. If so, the scanner has
less chance of finding an active
channel.
• Review each channel’s frequency to
see if it is still stored in memory and
is correct.
• It is possible that none of the
programmed frequencies are currently
active.
Scan won’t start. • Press the key again.
• Check that the squelch is ON.
• Check to see if all channels are locked
out.
Weather Scan won’t • Check that the squelch is ON.
work. • Check the antenna.
If you still cannot get satisfactory results and want additional
information, or to return the unit for service, please call or write
the Uniden Customer Service.
The address and phone number are listed in the Warranty at
the end of this manual, or call 1-800-297-1023.
27
Troubleshooting
BC45XLT 11/2/00 9:04 Page 27