beautypg.com

Chain search – Uniden BC45XLT User Manual

Page 22

background image

18

Chain Search

Use Chain Search to find active frequencies in your area.
You can search all five personal bands at once or turn off
those bands you don’t want to hear. This gives you flexibility of
searching for any channel between 29 and 512 MHz, as long
as they are within the 10 frequencies bands covered by the

BC45XLT

. See the table on page 3, the Technical

Specifications on page 28, or the table on the back of the

BC45XLT

.

Setting a Search Range

An error message displays when

is pressed and you have not

either specified a search range in at
least one Chain Search band.

– OR –

If you attempt to turn off all
Personal Chain Search bands.

The Error message turns off.
Press

to select the band you

want to program.

To program a frequency range into one of the five personal
Chain Search bands, follow these steps:

1. Press

until the search

location you want appears in the
display.

2. Enter lower limit of the search

band.

a. Enter the frequency

number.

b. Then press

.

a

b

BC45XLT 11/2/00 9:04 Page 18