Uniden BC45XLT - Manual (Page 25)

21
Channel Skip
If a particular channel continues to interrupt search scanning,
it is possible to set your scanner to skip the frequency.
If your scanner stops while
searching, press
to lockout
the frequency from the search
range.
Note: You can program 10 skip
frequencies. The 11th skip
frequency entered causes
the 1st skip frequency to unlock.
To unlock all skip frequencies at once, follow these steps:
1. Press either or during
a search.
Note: You must be in Search
Hold before restoring all
skipped frequencies.
2. Press and hold for about
two seconds.
You will hear two beeps when
all the channels have been
restored.
BC45XLT 11/2/00 9:04 Page 21