Uniden CEZAI2998 - Manual (Page 31)

9
your DSL service might have left some filters for you; if not, call your DSL
provider or look in any electronics store.
Plug the DSL filter into the telephone wall jack and then plug your phone’s
base into the filter. Make a test call to make sure the noise is gone.
resetting and registering Handsets
If you are having trouble with a cordless handset or if you want to replace
one, you need to clear the registration information from the base and the
handset:
do you have the base the handset is registered to?
Yes No
Press and hold FLASH/ExIT and PoUNd
(#) until the System Reset menu
appears (about 5 seconds).
Select Deregister HS. The display
lists all registered handsets.
Select the handset you want to reset.
When the phone asks you to confirm,
select Yes. The handset clears its
information from the base and deletes
it own link to the base.
1.
2.
3.
4.
Press and hold FLASH/ExIT and
PoUNd (#) until the System Reset
menu appears (about 5 seconds).
Select Base Unavailable.
When the phone asks you to
confirm, select Yes. The handset
deletes its own link without
contacting the base.
1.
2.
3.
When you reset a handset (or if you purchase a new one), that handset
displays a Handset Not Registered message. If you see this message on
a handset, you need to register it to a base before you can use it.
Registering a handset
On the base, open the menu and select Register Handset. The
display should say Handset Registering.
On the handset you want to register, press and hold
pOuND (#) until the
handset display says Handset Registering (about seconds).
In about 0 seconds, the handset display should say Registration
Complete. Press TaLk and make sure you get a dial tone.
If... Try...
you don't hear a dial tone
the display says Registration Failed -
-
Making sure the handset is fully
charged, then start over at step 1.
To register a handset to a different base, see the section "expanding
Your phone" in the user's guide for the other base.
)
)
)