Uniden CEZAI2998 - Manual (Page 24)

Using the Answering System
Setting Up Your Answering System
Recording your outgoing message
Your personal outgoing message or greeting can be between seconds
and 0 seconds long. If you don't want to record an outgoing message, the
system will use its pre-recorded greeting:
Hello, no one is available to take your call. Please leave a message
after the tone.
To record your greeting:
From the base From a cordless handset
Open the menu and select Ans.
Setup.
Select Record Greeting.
Press
SELECT/MENU again. Wait
for the system to say "Record
greeting," then begin speaking.
When you're finished, press
PLAY/
SToP. The system plays back your
new greeting.
To keep this greeting, press
PLAY/
SToP . To re-record it, go back to
step 2.
1.
2.
3.
4.
5.
Press MUTE/MESSAGES to access the
answering system. Wait until the
system finishes its announcements,
or press 5 (SToP) to skip them.
Press 8 .
Wait for the system to say "Record
greeting," then begin speaking.
When you're finished, press
8 to stop
recording. The system plays back
your new greeting.
To keep this greeting, press
FLASH/
ExIT To re-record it, go back to step 2.
1.
2.
3.
4.
5.
Switch between the pre-recorded greeting and your own greeting
From the base From a cordless handset
Open the menu and select Ans.
Setup.
Select Greeting Options. The
system plays back the greeting it is
currently using.
Press
rEPEAT or SKIP to switch
greetings.
1.
2.
3.
Press MUTE/MESSAGES to access the
answering system. Wait until the
system finishes its announcements,
or press 5 (SToP) to skip them.
Press 6 . The system plays back the
greeting it is currently using.
Press
6 again to switch greetings.
1.
2.
3.
Delete your greeting
From the base From a cordless handset
Switch to your personal greeting
following the steps above.
While the system is playing back
your greeting, press dELETE .
1.
2.
Switch to your personal greeting
following the steps above.
While the system is playing back
your greeting, press 4 .
1.
2.