Uniden CEZAI2998 - Manual (Page 18)

Open the menu and select Global Setup, then select Area Code.
Use the number keypad (
0 - 9 ) to enter your three-digit area code.
Press seLeCT/meNu when you’re finished.
The phone uses the programmed code as a filter. When calls come in,
the phone compares the received area code to the programmed one. If
they match, the phone hides the area code in the Caller ID list.
When you are reviewing the Caller ID list, press
pOuND ( # ) to toggle the
hidden area code.
Remember, when you dial a Caller ID record or store it in the
phonebook, the phone dials or stores the digits exactly as they appear
on the display. If you need to use ten digits, press pOuND ( # ) to show the
area code before you dial or store the number.
Using the Phonebook
Each station can store up to 0 entries in its phonebook.
Open or close the phonebook Press PHoNEBooK/LEFT .
Scroll through the entries
Press doWN to scroll through the phonebook
from A to Z or UP to scroll from Z to A.
Jump to entries that start with
a certain letter
Press the number key corresponding to the
letter you want to jump to.
Dial an entry
Find the entry you want to dial.
On the handset, press
TALK . On the base,
pick up the corded handset.
1.
2.
Phonebook menu options
Open the phonebook with the phone in standby, then press seLeCT/meNu
to open the phonebook menu. Choose one of these options:
Create New
Add an entry to your phonebook. The phone will prompt you
to enter the name and phone number. (Cordless handsets will
also prompt you to choose a personal ring.)
Copy All
Copy the whole phonebook to another station. (You must have
at least one accessory handset to use this multi-station feature.)
Delete All
Erase all the entries in this station's phonebook. (This does not
affect the entries saved on any other stations.)
)
)
)


