Getting your messages, Ans. setup menu options, Accessing your answering system from a handset – Uniden CEZAI2998 User Manual
Page 25: Stop [ / /select
Ans. Setup menu options
You can change the answering system options from any station. Just open
the menu and select Ans. Setup.
Record Greeting (Base only) Record an outgoing message (see page 22)
Greeting
Options
(Base only) Change greetings or delete your personal
greeting (see page 22).
Security Code
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 25).
Ring Time
Set the number of rings (2, 4, or 6) before the answering
system answers the phone. Choose Toll Saver (TS) to
have the system pick up after 2 rings if you have new
messages or after 4 rings if you don't.
Record Time
Set the amount of time callers have to leave a message,
either 1 minute or 4 minutes. Choose Announce Only if
you don't want the system to let callers to leave a message.
Message Alert
Have the system beep every 15 seconds when you have
a new message; the beeping stops when you listen to all
your new messages. (To mute the alert without listening to
your messages, press any key on the base.)
Ans. Language Change the language of the system's voice prompts.
Call Screen
Turn on the call screen feature so you can hear callers as
they leave messages on the base speaker (see page 24).
Ans. On/off
(Handset only) Turn your answering system on or off. (To
turn your system on or off from the base, just press
oN/oFF
.)
Getting Your Messages
Accessing your answering system from a handset
You can access your system from a cordless handset whenever the phone
is in standby.
5:Stop
[ / /select]
Press
MUTE/MESSAGES
to start
remote operation mode.
Press
SELECT/MENU
to
choose the current option.
Press
FLASH/EXIT
to stop
remote operation mode.
1:Repeat
2:Play
3:Skip
4:Delete
6:SelectGreeting
8:RecNewGreeting
Use
PHONEBOOK/LEFT
to go
to the previous option.
Use
CALLER ID/RIGHT
to
go to the next option.
5:Stop
[ / /select]
Press
MUTE/MESSAGES
to start
remote operation mode.
Press
SELECT/MENU
to
choose the current option.
Press
FLASH/EXIT
to stop
remote operation mode.
1:Repeat
2:Play
3:Skip
4:Delete
6:SelectGreeting
8:RecNewGreeting
Use
PHONEBOOK/LEFT
to go
to the previous option.
Use
CALLER ID/RIGHT
to
go to the next option.