Toshiba TEC EM1-33046A - Manual (Page 26)

10. INSTALL MOMORY MODULE EM1-33046A
10. INSTALL MEMORY MODULE
NOTES: 1. Be sure to protect a memory module by putting it in it's protective cover when not in use
in the printer.
2. Do not subject the memory module to any shocks or excessive forces.
3. Do not expose the memory module to direct sunlight or store it close to a heater.
4. Do not expose the memory module to excessive humidity by wiping it with a wet cloth or
storing it in a damp place.
5. Before inserting or removing the memory module, make sure that the power switch is
turned off.
WARNING!
Turn the power OFF when inserting or removing the memory module.
10. INSTALL MEMORY MODULE
Fig. 10-1 Install Memory Module (Option)
1. Memory Module
2. Cover
1. Make sure the power is turned off.
2. Take off the cover from memory module .
3. Insert the memory module and press at the end of the slot.
NOTE: Care must be taken not to insert the memory module in wrong orientation.
4. Put the cover on the memory module.
5. Turn on the power.
1
2
10-1