Toshiba TEC EM1-33046A - Manual (Page 22)

7. SELF-PEELING FUNCTION EM1-33046A
7. SELF-PEELING FUNCTION
Fig. 7-1 Setting Up Printer for Self-Peeling Function
1. Printer Carriage Release Lever 3. Self-peeling Roller
2. Front Rubber Roller 4. Backing Paper
7. SELF-PEELING FUNCTION
1. Remove the printer’s front panel.
Fig. 7-2 Printer Ready for Self-Peeling Function
1. Printer Carriage Release Lever 4. Backing Paper
2. Printer Front Panel 5. Label
3. Backing Paper Opening
CAUTION: When removing the front panel, care must be taken not to damage the label taken
sensor harness.
2. Feed the backing of the label stock between the front rubber roller and the Self-peeling roller just in
front of it, as shown in Fig. 7-1.
3. Feed the backing paper through the Backing Paper Opening in the front panel and replace the panel
as shown in Fig. 7-2.
1
3
4
2
3
4 5
2
1
7-1