Technicolor - Thomson MS4300 - Manual (Page 12)

7
EN
Settings
Showing Demonstration
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold CLOCK until the hour flashes
on the display.
2. Press PRESET - or PRESET + to set
the hour and then press CLOCK to shift to
minute digits.
3. Press PRESET - or PRESET + to set
the minute.
4. Press PROG/SET to save settings and STOP
to quit setting.
Setting the Timer
1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press PRESET - or
PRESET + on the main unit to set the
hour and then press TIMER to shift to
minute digits.
3. Press PRESET - or PRESET + to set
the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press PRESET -
or PRESET + to select between CD /
TUNER / TAPE / REC TU.
If REC TU is selected, select the preset station
by pressing PRESET -
or PRESET + on
the main unit or PRESET FOLDER or
on the remote control.
6. Press TIMER to set volume. Adjust VOLUME
control to select desired volume level.
7. Press PROG/SET to save settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the timer.
The timer icon is displayed when timer is
activated.
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
MS4300 EN 3/9/05 4:33 PM Page 13