TANDBERG D12817-05 - Manual (Page 73)

TANDBERG Videoconferencing System
73
Peripherals
2 Video Inputs
• 1 video input used by the built-in camera.
• 1 video input supporting composite signals through RCA connector.
The system will automatically adapt to a PAL or NTSC input.
3 Video Outputs
• 1 S-Video output, Mini-DIN connector.
• 1 composite video output, RCA connector.
• 1 VGA output supporting resolutions VGA(640x480), SVGA(800X600) and XGA(1024x768).
The format of the output will be either PAL or NTSC depending on your country’s standard video format.
2 Audio Inputs
• 1 microphone input (balanced, 11V phantom powered) via XLR connector.
• 1 audio input (line level) via RCA connector.
All audio inputs are active by default. For further information, refer to section ‘Audio Settings’.
1 Audio Output
• 1 output (line level) via RCA connector providing audio from far end in addition to dial tones. This output is used
by the monitor.