TANDBERG D12817-05 - Manual (Page 57)

TANDBERG Videoconferencing System
57
Advanced use
NOTE
SNMP Trap Host
SNMP (Simple Network Management Protocol) is used for monitoring and configuring different units in a network.
The codec’s SNMP Agent responds to requests from SNMP Managers (a PC program etc.). SNMP traps are
generated by the agent to inform the manager about important events.
SNMP Trap Host identifies the IP-address of the SNMP manager.
SNMP Community
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have a ‘password’ in
order to receive a response from the SNMP agent in the codec.
T
HE
SNMP C
OMMUNITY NAME IS CASE SENSITIVE
.
SNMP Settings