Tascam cdrw 402 - Manual (Page 3)

TASCAM CD-RW402 Quick Start guide
2 Turn the
MULTI DIAL
to select the TOC edit-
ing options, and push it to carry out the
operation.
Sometimes you may need to confirm the
operation by pressing the
MULTI DIAL
again.
3 Divide a track into two at the current
position.
4 Combine two tracks.
5 Erase a track from the TOC
6 Move the start of the track or the end of the
track to the current playback position.
7 Return the disc to “normal” by ejecting it, or
the
ALL CANCEL
menu option (when the drive
is stopped.
Analog and digital source volume
1 When recording from an outside source on
drive 2, use the
INPUT SELECTOR
to choose
between the digital
COAXIAL
or
OPTICAL
con-
nectors, the
ANALOG
connectors, or
INTERNAL
(drive 1).
2 Adjust the level of analog signals (and their
balance) using the
INPUT
and
BALANCE
controls.
3 Use the
REC MENU 1
menu to select the digital
volume to set the level of all signals (analog
post-step 2, and digital).
Adjust the level between -
60
and
+18 dB
(there is also an “off” setting, shown by ---).
TOC EDIT
Track 2 Track 2 Track 3
DIVIDE
Track 5 Track 6 Track 5
COMBINE
Track 9 Track 10 Track 11 Track 10 Track 9
ERASE TRACK
Track 5 Track 5
StartPt SET
Track 5 Track 5
End Pt SET
ALL CANCEL?
REC MENU 1 DIG VOLUME