Tascam cdrw 402 - Manual (Page 2)

TASCAM CD-RW402 Quick Start guide
Copying discs (disc at once)
1 Insert the source disc into drive 1 and a
blank recordable disc.into drive 2
Close both drive trays.
2 Press the
DISC COPY
key.
The display shows
DISC AT ONCE
/
COPY> DAO
if
a data disc is being copied.
NOTE that the procedure for audio discs is
slightly different—see the manual for
details.
3 Press the
MULTI DIAL
(2).
Turn the
MULTI DIAL
(2) to select the copy
speed (1x, 2x or 4x).
Push the
MULTI DIAL
to confirm the setting.
4 Turn the
MULTI DIAL
to select whether to
compare the two discs after the contents of
the source disc have been copied to it.
Press the
MULTI DIAL
to confirm the setting.
5 Press the
MULTI DIAL
to start the copy
process.
6 After a brief standby period, the lead-in is
written, the copy process continues, and the
time so far (at normal speed) is shown.
The disc will be finalized (
Lead Out
) after the
data has been copied.
If you have selected the compare option, the
discs will be compared following the finali-
zaison.
TOC EDIT
1 When an audio disc is in drive 1, it is possi-
ble to edit the TOC so that tracks are joined,
split or removed, and the start and end times
of tracks can be shifted.
This applies only to the TOC, not the mate-
rial actually recorded on the disc.
With the drive in play or ready mode, press
MENU
(1), turn the
MULTI DIAL
to display
TOC EDIT ?
, and press the
MULTI DIAL
.
DISC AT ONCE COPY> DAO
CopySpeed>x4
COMPARE > NO
COPY START ?
1 01 1:56
Lead In 1:12
LeadOut 0:23
COMPARE21:45
TOC EDIT ?