Tanita TBF-560 - Manual (Page 8)

7
Inserting the batteries
1. Open the battery cover on the back of the measuring platform.
2. Insert the supplied AA-size batteries as indicated.
NOTE: Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend to
use this unit for a long period of time, it is advisable to remove the batteries before storage.
Positioning the measuring platform
Place the measuring platform on a hard, flat surface where there is minimal vibration to
ensure safe and accurate measurement.
NOTE: To avoid possible injury, do not step on the edge of the platform.
Attaching the support feet (carpet use only)
Insert the support feet into the holes at the four corners on the bottom of the
measuring platform.
NOTE: Do not use the support feet on hard, flat surfaces, as the unit may tip over. Do
not use the measuring platform on any carpeting that is more than 0.8 inches in
thickness. To avoid unstable readings.
Handling tips
This monitor is a precision instrument utilizing state-of-the-art technology. To keep the
unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the PERSONAL keys will not be
pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high
humidity, or extreme temperature change.
• Never submerge in water. To clean, use a dampened cloth and mild detergent.
Use alcohol to clean the electrodes.
• When you change the batteries, exchange all four batteries at the same time with
new AA-size batteries.
If you need assistance, please call our toll-free customer service number at 1-800-TANITA-8.
Preparations before use
!
!
!
;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;
Open as shown
(detachable) Direction of the batteries