Toshiba DP5000-Series - Manual (Page 112)

Administrator Programming
Administrator Mode
96
Strata CIX DP5000-series Telephone UG 10/10
Administrator Mode
To access Administrator Mode, your station must be enabled for administrative
access.
If Mode soft key is not available when telephone is idle, the telephone set does not
have Administrative access.

To enter Administrator Mode
1. Press Mode soft key.
2. Press ADMN soft key. The “Password” prompt appears.
Enter the password (0000 – default).
3. Press Hold .
Follow the steps below to perform the following Administrator functions in
Administrator Mode.
Phone Name
1. Enter Administrator Mode
2. Press
Hold
.
3. Enter the DN ID number. This is the extension number (PDN) of the telephone.
4. Enter the Phone Name that corresponds with that DN ID.
5. Press
Hold
to register the name and move on to the next Phone name entry.
6. Press
RTRN
softkey.
7. Repeat steps 1~4 to program additional names.