Toshiba CGSV90CC3 - Manual (Page 38)

(5/16)
D4153497A
(9) Scalable mode
This camera has the scalable mode that can read out defined area of the screen. Only continuous rectangle
units can be selected, concave or convex shape cannot be selected.
- Window size: {A x m(H)} x {B x n(V)}
* A and B are minimum unit size.
* m, n = integer, and the image of maximum unit size or less can be selected.
* Only one window can be selected.
CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18
Minimum unit size (H) x (V) 160 x 120 256 x 192 160 x 120 200 x 150
Maximum unit size (H) x (V) 640 x 480 1024 x 768 1280 x 960 1600 x 1200
- Start address: {32 x i(H)} x {24 x j(V)}
* i, j = integer, and the image of maximum unit size or less can be selected.
( X , Y )=( 32 * i , 24 * j )
A * m
B *
n
In the scalable mode, this camera reads out only the necessary portions at the standard speed while it scans
through other unnecessary portions at high speed, so the trigger interval can be shorter if the vertical cutout
width is small. However, the trigger interval cannot be short in the horizontal direction even if the cutout width
is small due to the operation mechanism of the CCD sensor.
Notes on scalable mode:
- White lines may occur in the upper portions of the screen when strong light exists in a wide area
durring the scalable mode. This is not a malfunction. If white lines occur, adjust the amount of
incident light using the lens.
(X, Y) = (32 x i, 24 x j)
A x m
B x n