TOA Electronics N-CC2564 - Manual (Page 5)

5
• Noise may appear on the monitor or preset camera positions may deviate with prolonged camera use. In
such cases, use the camera’s refresh function to automatically refresh settings and reestablish the home
position once a day or week, thus allowing any position deviation to be corrected. When correcting manually,
display the menu screen using the software decoder and execute "Initialize" on the "Maintenance" items.
• It is recommended that the unit be installed in locations where the temperature is under +40°C, as the
longevity of the unit may reduce with prolonged unit use under high temperature and high humidity.
• Do not direct the camera lens to the sun or strong lighting or light reflection. Exposure to direct sunlight could
cause the CCD's color filter to deteriorate, leading to image discoloration.
• Do not install the unit in locations exposed to constant vibration. The unit is not intended for vehicle use. Do
not install the unit in a vehicle or ship.
• Do not give vibration or shock to the unit, as doing so may cause unit breakdown, or damage.
• Avoid installing the unit on sea or shore, or in locations exposed to dust or corrosive gas, or extraordinary
combustible conditions, or in swimming pools where disinfectants are used.
• To prevent the unit falls off, be sure to hang the supplied safety wire first when installing the unit.
• The dome camera is designed solely for suspended installations. The camera or dome must be suspended
vertically with its dome facing downward. Use special care not to suspend it at a tilted angle.
• Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.
• The unit is not equipped with a power switch. Perform power construction work so that the camera power
can be turned on and off remotely.
• The dome camera features built-in heat generating circuitry. Take care not to touch the internal parts marked
"Caution High Temperature" when working inside the camera during dome cleaning or maintenance.
3. GENERAL DESCRIPTION
The N-CC2564 Network Combination Dome Camera can be connected directly to a LAN (10BASE-
T/100BASE TX). Since it can simultaneously transmit MPEG-4 and JPEG data, smooth moving images can
be monitored and high-definition still images can be monitored and recorded. The N-CC2564 can transmit
sub-band ADPCM or PCM quality voice.
TOA’s dome-type color cameras combine with a high-speed camera drive that permits one 360-degree
horizontal rotation per second and a 23 times optical zoom lens Up to 255 arbitrary positions can be preset
and such preset positions can be instantaneously repeated.
4. FEATURES
• Digital signal processing realizes high resolution and high picture quality. The unit also features the video
memory that increases the electronic sensitivity up to 32 times and enables electronic zooming.
• The supplied software decoder permits the images to be monitored via the network.
• It is also equipped with Timer, Motion Detection, Auto-flip, Wide Dynamic, Black & White mode, 12 times
Electronic Zooming and Privacy Masking functions
5. HANDLING PRECAUTIONS