TOA Electronics N-CC2564 - Manual (Page 14)

14
40 mm or less
100 mm or more
Upper ceiling
Ceiling panel
Note
When routing the wiring from the
ceiling surface, the ceiling panel
must be 9 - 40 mm in thickness.
Safety wire
(supplied with the C-BC511A)
Upper ceiling
Anchor bolt for safety wire
Anchor bolt for celing mounting bracket
Network Combination Dome camera
C-BC511C, C-BC511C-S
Ceiling Mounting Cover (optional)
Ceiling panel
C-BC511A
Ceiling Mounting Bracket (optional)
9. MOUNTING THE CAMERA TO A WEAK CEILING PANEL
Use the optional C-BC511C or C-BC511C-S Ceiling Mounting Cover and the optional C-BC511A Ceiling
Mounting Bracket.
Notes
• Use the cover and the anchor whenever the space between suspended ceiling panel and upper ceiling
exceeds a height of 100 mm.
• The ceiling panel to which the camera will be mounted must be 9 - 40 mm in thickness.
• Be sure to use the supplied safety wire.
• Be sure to use the specified screws to mount the Network Combination Dome Camera and direct mounting
anchor, and ensure that they are securely mounted without any play.
9.1. Mounting Example