Other functions, Selecting input source, Screen saver – Toshiba SD-63HK User Manual
Page 38: Sleep timer dimmer mute using headphone socket
38
Other functions
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, “MUTE” indicator appears
on the display window.
Connect a stereo headphone plug (ø 3.5mm) into
the HEADPHONE socket on the rear panel.
The speakers are automatically disconnected
when you plug in the headphones (not supplied).
Notes:
• When you use the headphones, keep the volume at a
moderate level. If you use the headphones continuously
with high volume sound, it may cause hearing damage.
• In using the headphones, Tone/Bass Boost/Surround
settings do not effect.
Selecting input source
You can use VCRs or other units connected to the
LINE IN 1 or LINE IN 2 connectors.
Press INPUT SELECT repeatedly on the remote
control to select the desired input source.
Note:
The Optical/Coaxial input function is available only when
the other unit’s Sampling Frequency is as follows.
PCM:
32KHz, 44.1KHz, 48KHz
Dolby Digital:
48KHz
DTS:
44.1KHz, 48KHz
Depending on the setting or the combination of the other
unit, the sound may not be played correctly.
Screen saver
The screen saver operates when you leave the
unit in DVD stop mode for about five minutes.
You can set the DVD receiver to turn off automati-
cally at a specified time.
Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appears on the
display window.
Each time you press SLEEP, the setting changes
in the following order.
SLEEP
120 110 100 ... 30 20 10 0(off)
Notes:
• After the sleep timer is programmed, the remaining
timer appears briefly every ten minutes on the display
window.
• To confirm the sleep timer setting, press SLEEP.
This function will change the brightness of the
display window and the control buttons on the
front panel during Power-on status.
Press the DIMMER to dim the display window.
To cancel the Dimmer function, press DIMMER
again.
Press and hold DIMMER for 3 seconds to dim the
control buttons.
To cancel the Dimmer function, press and hold
DIMMER for 3 seconds again.
Sleep timer
Dimmer
Mute
Using headphone socket