Toshiba SD-63HK - Manual (Page 37)

37
Press PRESET + or – to select the desired
position number.
You can also select the desired position num-
ber using the number buttons (0–9), then press
ENTER.
• For example, to select the preset position
number 7, press 0 and 7, then press ENTER.
To select the preset position number 25, press
2 and 5, then press ENTER.
Preset the radio stations first as described on page 36.
Press DVD/FM/AM to select FM or AM.
Listening to the radio
1
2
Reception of RDS (Radio Data
System) stations
RDS (Radio Data System) is a system gradually being
introduced on FM in many countries, where by an inau-
dible stream of data is transmitted in addition to the nor-
mal radio signal. This data contains various information
including station/transmitter identification, traffic informa-
tion and a list of alternative frequencies for the radio sta-
tion being received.
Note:
RDS is only available for FM reception.
Press DVD/FM/AM select FM. 1
2 Select a desired station by pressing the PRE-
SET + or –.
When the RDS transmission is received, the
RDS indicator appears on the display window.
Adjust the volume by rotating Volume knob on
the front panel or VOL +/– on the remote con-
trol. 3
3 Press RDS.
The programme service name (PS) appears on
the display window.
• To make the programme service name (PS)
disappear, press RDS again.