Network settings, Ip settings, Callmanager – TANDBERG 550 User Manual
Page 25
TANDBERG 1000/550 for Cisco
CallManager
25
Advanced Use
IP-assignment
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.
DHCP:
IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by
the DHCP server.
Static:
The unit’s IP-address and IP-subnet mask must be specified in the IP-address field.
C
HANGES
IN
THIS
MENU
WILL
NOT
HAVE
ANY
EFFECT
BEFORE
THE
SYSTEM
IS
RESTARTED
.
NOTE
Network Settings
The network settings menu enables you to configure IP, TFTP, wireless LAN and DNS.
T
HE
W
IRELESS
LAN S
ETTINGS
MENU
MAY
NOT
BE
AVAILABLE
. T
HIS
DEPENDS
ON
WHETHER
YOUR
UNIT
HAS
A
W
IRELESS
LAN
CARD
SLOT
OR
NOT
.
IP Settings
Y
OU
SHOULD
NOT
CHANGE
ANY
NETWORK
SETTINGS
WITHOUT
CONFIRMING
THIS
WITH
YOUR
SYSTEM
ADMINISTRATOR
. I
NCORRECT
NETWORK
CONFIGURATION
MAY
CAUSE
MALFUNCTION
IN
YOUR
UNIT
.
NOTE
NOTE