Power cable, Lan cable, Wireless lan - insert pc card – TANDBERG 550 User Manual
Page 10
10
TANDBERG 1000/550 for Cisco
CallManager
Installation
Power Cable
• Connect the power supply to the ‘DC in’ input on
the system.
• Connect the power cable to the power supply.
• Connect the power cable to an electrical
distribution socket.
LAN Cable
• Connect a LAN cable from the ‘Ethernet’ connector on the system to your
LAN.
Wireless LAN - Insert PC Card
• Remove the “dummy” card by pressing the ‘Eject’ button next to the slot.
• Insert the Wireless LAN PC Card.
M
AKE
SURE
YOU
INSERT
THE
CARD
IN
THE
RIGHT
DIRECTION
(
SEE
DRAWING
). P
USH
THE
CARD
INTO
THE
SLOT
UNTIL
THE
‘E
JECT
’
BUTTON
POPS
UP
.
See ‘Wireless LAN Settings’ for configuration.
NOTE
This manual is related to the following products: