Telos NX12 - Manual (Page 52)

42 | section 4
feedback, lower the cue speaker volume.
Making calls using the built-in speakerphone. Press the Speakerphone button, select a line
using the left column and dial. If you wish to place this caller on air, you can press a left or right
column line button.
Answering calls with the handset. Pick up the handset and select a line using the left column
or press Next to select the line which has been ringing longest.
Answering calls using the speakerphone. Press the Speakerphone button and select a line
using the left column or press Next to select the line which has been ringing longest.
4.2 The Call Controller
The Call Controller, together with a user-provided telephone, emulates a Desktop Director. See
the Call Controller manual for additional information.
Because there is no LCD, the dialing keypad is used to change modes, as follows:
*PRODUCER (*77638237) changes to Producer mode
*TALENT (*825368) changes to Talent mode
*DD (*33) is current ID for this unit
*SHOW1 (*74691) connects this controller to Show 1
*SHOW2 (*74692) connects this controller to Show 2
4.3 The Console Director
Telos provides sub-assemblies to a number of mixing console manufacturers, allowing them to
offer you a console-mounted control surface compatible with the Nx12, 2x12, and Series 2101
systems. The Console Director works much like the Desktop Director in Talent mode.