Telos NX12 - Manual (Page 41)

BasIC ConfIguraTIon | 31
artifacts, and the caller should sound clear.
Move the call to Phone 2 by pressing the right column line 1.
7.
Repeat steps 4 through 6 using lines on the right column. 8.
What now?
Your basic installation is complete. Next you will want to look over other sections of this manual
to familiarize yourself with the system and to set up the following parameters:
Desktop Director operation See Section 4
♦
Receive EQ, AGC & Noise Gate See Section 5.4 and 5.11
♦
Caller ducking adjustment See Section 5.4 and 5.11
♦
Feedback reduction (when using open speakers) See Section 5.4 and 5.11
♦
Send EQ, AGC See Section 5.4 and 5.11
♦
Mix-minus modes See Section 5.4
♦
Show Modes (one Nx12 serving two studios, etc.) See Section 5.7
♦