Top Innovations SF-226 - Manual (Page 10)

10
U
SING THE
H
ANDHELD
S
TEAM
C
LEANER
Top Innovations, Inc.
FILLING BOILER WITH WATER
1. Place Handheld Steam Cleaner on a flat, level surface.
2. Make sure electrical cord is unplugged from outlet.
3. If unit has been in use, allow at least 5 minutes for Boiler to cool. Press and hold Steam Button
to ensure that any remaining steam has been released.
4. Cautiously remove Boiler Cap by unscrewing it in a counter-clockwise direction, and lift it off.
5. Boiler should always be emptied after each use. If it was not emptied after the last use, empty it
now - this will make it easier to fill with the correct amount of water.
6. Fill included Measuring Cup with 6 oz. (177 ml.) of water.
NOTE: In order to extend the life of your Handheld Steam Cleaner and keep it functioning
at it’s maximum potential, it is highly recommended that distilled or de-mineralized water
be used in Boiler.
7. Carefully pour water from Measuring Cup into Boiler through fill hole.
WARNING: Extreme caution should be used when pouring water into the Boiler. Do not
look directly down into fill hole when filling. Keep your free hand and any children or pets
at a safe distance.
NOTE: In order to prevent excessive water dripping in steam, do not exceed the Boiler’s
maximum capacity of 6 oz. (177 ml.).
8. Replace Boiler Cap, screwing it in a clockwise direction to tighten. Make sure it is screwed on
securely to prevent hot water or steam from escaping.