5personalisation – Topcom Butler 3550/Twin User Manual
Page 14
14
Topcom Butler 3550/Twin
Topcom Butler 3550/Twin
5
Personalisation
5.1
Speaker volume during call
During conversation, press the up
or down
key to change the volume accordingly.
5.2
Adjusting the ring volume
5.2.1 Handset ringvolume External/internal calls
The handset ringvolume for internal or external calls can be set separately:
1.
Enter the menu by pressing /OK
2.
Select HANDSET using the up and down
keys
3.
Press OK
4.
Select INT RING VOL or EXT RING VOL using the up
and down keys
5.
Press OK
6.
Select the desired volume (OFF or 1 to 3 )
7.
Press OK to confirm or
to return to the previous menu
5.2.2 Base ring
1.
Enter the menu by pressing /OK
2.
Select SETUP using the up
and down
keys
3.
Press /OK
4.
Select BASE VOLUME using the up and down
keys
5.
Press /OK
6.
Select the desired volume (OFF or 1 to 3)
7.
Press
/OK to confirm or to return to the previous menu
5.3
Choosing the ring melody
The base and each handset can ring with a different melody.
The handsets can ring with a different melody according to whether the incoming call is
internal or external.
5.3.1 Base melody
1.
Enter the menu by pressing /OK
2.
Select SETUP using the up
and down
keys
3.
Press /OK
4.
Select BASE MELODY using the up and down
keys
Every programmation is confirmed at the end by a double or single long
beep. A double bleep confirms the validation of your choice. A long bleep
signifies that the modification has not been taken into account.
The handsfree volume is also adjust together with the receiver in the
handset as above described.