0x42, 0x43 – Trimble Outdoors SK8 User Manual
Page 94

A-30
Lassen-SK8 Embedded GPS Module
Trimble Standard Interface Protocol
A.17.23 Report Packet 0x42
This packet provides current GPS position fix in XYZ ECEF coordinates. If the I/O
“position” option is set to “XYZ ECEF” and the I/O “precision-of-position output” is set
to single-precision, then the GPS receiver sends this packet each time a fix is computed.
The data format is shown below.
The time-of-fix is in GPS time or UTC as selected by the I/O “timing” option. Packet 83
provides a double-precision version of this information.
A.17.24 Report Packet 0x43
This packet provides current GPS velocity fix in XYZ ECEF coordinates. If the I/O
“velocity” option is set to “XYZ ECEF, then the GPS receiver sends this packet each time
a fix is computed. The data format is shown below.
The time-of-fix is in GPS time or UTC as selected by the I/O “timing” option.
Table A-27.
Report Packet 0x42 Data Formats
Byte
Item
Type
Units
0-3
X
SINGLE
meters
4-7
Y
SINGLE
meters
8-11
Z
SINGLE
meters
12-15
time-of-fix
SINGLE
seconds
Table A-28.
Report Packet 0x43 Data Formats
Byte
Item
Type
Value
0-3
X velocity
SINGLE
meters/second
4-7
Y velocity
SINGLE
meters/second
8-11
Z velocity
SINGLE
meters/second
12-15
bias rate
SINGLE
meters/second
16-19
time-of-fix
SINGLE
seconds