C.19 rt reset mode – Trimble Outdoors SK8 User Manual
Page 167
Lassen-SK8 Embedded GPS Module
C-21
Trimble ASCII Interface Protocol (TAIP)
C.19
RT Reset Mode
Data String Format:
Any one of the following data strings can be set. Upper case characters are required.
[ ]
[COLD]
[FACTORY]
[SAVE_CONFIG]
Table C-19.
Reset Mode Data String Descriptions
The only valid qualifier is SET.
The SAVE_CONFIG data string is the only method of saving the TAIP protocol definition
to Serial EEPROM.
The following command will save the protocol and port definitions to Serial EEPROM:
>SRTSAVE_CONFIG<
Item
# of Char
Description
[]
0
Warm start
[COLD]
4
Cold start
[FACTORY]
7
Factory Reset
[SAVE_CONFIG]
15
Save serial EEPROM user values