Perreaux SILHOUETTE SXV1 - Manual (Page 23)

23
Interconnect cables not connected
Make sure that the input and output interconnect cables are
plugged in and are connected to the respective RCA sockets on
the rear of the SXV1.
Cartridge not connected
Confirm that the cartridge is correctly connected and fitted to the
tone arm.
Turntable not turned on
Check that your turntable is plugged into the mains and the
power is turned on.
Tone arm is not lowered onto record
Make sure that the tone arm is moved from it’s stationary
position and lowered onto the record.
Other components not turned on
Check that your preamplifier and/or amplifier are plugged into
the mains and the power is turned on.
No volume setting
Make sure that the volume on your preamplifier or amplifier is
set to a suitable level. Check that it is not muted or attenuated.
Preamplifier/amplifier set to incorrect input
Confirm that the source input on your preamplifier/amplifier is
set to the appropriate input.
Speakers not connected
Check that your speaker cables are firmly connected at both the
binding posts of your amplifier and the speaker terminals.
I can hear a
hum coming
through my
speakers
Phono earth not connected
Confirm that the earth terminal from your turntable is solidly
connected to the phono earth binding post on the rear of the
SXV1.
Phono earth binding post and/or earth terminal corroded
Check that the phono earth binding post on the rear of the SXV1
and the earth terminal from your turntable is free from corrosion.