Tripp Lite 93-2879 User Manual
Page 4
4
6.2.9
Choosing an alternate SSH client (e.g. PuTTY) 70
6.3
SDT Connector to Management Console
75
6.4
SDT Connector - Telnet or SSH connect to serially attached devices
76
6.5
Using SDT Connector for out-of-band connection to the gateway
77
6.6
Importing (and exporting) preferences
79
6.7
SDT Connector Public Key Authentication
79
6.8
Setting up SDT for Remote Desktop access
80
6.8.1
Enable Remote Desktop on the target Windows computer to be accessed 80
6.8.2
Configure the Remote Desktop Connection client 81
6.9
SDT SHH Tunnel for VNC
85
6.9.1
Install and configure the VNC Server on the computer to be accessed 85
6.9.2
Install, configure and connect the VNC Viewer 86
6.10
Using SDT to IP connect to hosts that are serially attached to the gateway
88
6.10.1
Establish a PPP connection between the host COM port and Console Server 88
6.10.2
Set up SDT Serial Ports on Console Server 91
6.10.3
Set up SDT Connector to ssh port forward over the Console Server Serial Port 92
7.
ALERTS AND LOGGING
93
7.1
Configure SMTP/SMS/SNMP/Nagios alert service
93
7.1.1
Email alerts
93
7.1.2
SMS alerts
94
7.1.3
SNMP alerts
95
7.1.4
Nagios alerts
96
7.2
Activate Alert Events and Notifications
96
7.2.1
Add a new alert
97
7.2.2
Select general alert type 98
7.2.3
Configuring environment and power alert type 99
7.3
Remote Log Storage
100
7.4
Serial Port Logging
101
7.5
Network TCP or UDP Port Logging
102
POWER & ENVIRONMENTAL MANAGEMENT
103
8.1
Remote Power Control (RPC)
103
8.1.1
RPC connection
103
8.1.2
RPC alerts
105
8.1.3
RPC status
105