Tripp Lite 93-2879 User Manual
Page 195
_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual
Page 195
The first is to have scripts to support the particular RPC included in the open source PowerMan
project (
http://sourceforge.net/projects/powerman
). The PowerMan device specifications are
unusual and it is suggested that you leave the actual writing of these scripts to the PowerMan
authors. However documentation on how they work can be found at
http://linux.die.net/man/5/powerman.dev
. Once the new RPC support has been built into the
PowerMan, we will include the updated PowerMan build in a subsequent firmware release.
The second path is to directly add support for the new RPC devices (or to customize the existing
RPC device support) on your particular Console Server. The Manage: Power page uses
information contained in /etc/powerstrips.xml to configure and control devices attached to a
serial port. The configuration also looks for (and loads) /etc/config/powerstrips.xml if it exists.
The user can add their own support for more devices by putting definitions for them into
/etc/config/powerstrips.xml. This file can be created on a host system and copied to the
Management Console device using scp. Alternatively, login to the Management Console and
use ftp or wget to transfer files.
Here is a brief description of the elements of the XML entries in /etc/config/powerstrips.xml.
...
rate
size
bits
setting
The id appears on the web page in the list of available devices types to configure.
The outlets describe targets that the scripts can control. For example, a power control board
may control several different outlets. The port-id is the native name for identifying the outlet.