Removal and replacement of media – Toshiba SL-9000 User Manual

Page 23

9-1

9. REMOVAL AND REPLACEMENT OF MEDIA

EM1-31064

9. REMOVAL AND REPLACEMENT OF MEDIA

1. Open the right cover. Then push the head-up lever in the direction indicated by the arrow.

Head-up Lever

2. Pull out the label cassette.
3. Pull out the roll stopper and the backing paper stopper, and remove the media core with backing paper.

Label Cassette

Roll Stopper

Backing Paper Stopper

Backing Paper

NOTE: When removing the backing paper, loosen the paper by turning the paper winding shaft

counterclockwise.

WARNING!

Since there is a cutter at the paper outlet, be careful not to injure your fingers when
replacing media.

CAUTION: Do not hold the label cassette by the portion A. Doing so may deform the label

cassette, causing damage when setting it in position. Please be sure to hold
the label cassette as the following figure shows.