Topcom BUTLER 5070 - Manual (Page 88)

- Press OK to confirm.
- Press OPT.
- Select EDIT OR DELETE by using the UP- and DOWN keys.
- Press OK to confirm.
- Edit the selected telephone number by means of the numerical keypad (press C to erase a digit) or
confirm Sure? to delete
- Press OK to confirm.
- Press ESC to leave the setting.
8.6.4. Activating/deactivating the incoming call filter
To activate/deactivate the incoming call filter
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
- Select CALL FILTER by using the UP- and DOWN keys.
- Press OK to confirm.
- Select F_ACTIVE by using the UP- and DOWN keys.
- Press OK to switch over activate (V appears on the display)/deactivate.
- Press ESC to leave the setting.
8.7. Base set Security:
8.7.1. Change Base PIN Code
The standard Pin code is 0000
To change the Pin code:
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Select SECURITY by using the UP- and DOWN keys.
- Press OK to confirm.
- Select CHANGE PIN by using the UP- and DOWN keys.
- Press OK to confirm.
- Enter the new Pin code: NEW PIN:
- Press OK to confirm.
- Re-enter the new Pin code: NEW PIN:
- Press OK to confirm.
- Press ESC to leave the menu.
8.7.2. Emergency numbers
The telephone contains a list 3 emergency phone numbers. 110 and 112 are already preprogrammed in
the telephone. A third number can be entered.
These numbers can always be dialed, also when the keypad is locked or restriction is programmed.
To enter the 3 the emergency number:
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
88
Butler 5070